Note: This tutorial assumes that you have completed the previous tutorials: qbmove ROS Packages Installation.
(!) Please ask about problems and questions regarding this tutorial on answers.ros.org. Don't forget to include in your question the link to this page, the versions of your OS & ROS, and also add appropriate tags.

qbmove Setup

Description: How to connect the qbmove to the system and check its configuration

Keywords: qbmove setup

Tutorial Level: BEGINNER

Connect a qbmove to your system is basically a matter of plugging in a USB cable. Nonetheless, read carefully the following notes:

  • Connect the qbmove to your system either directly through an USB cable or to an already connected qbrobotics device chain.

    • Single mode: the device has to be connected either directly to your ROS master host through a USB cable or with an ERNI cable to a qbrobotics dummy board which in turn has to be connected to the system through a USB cable. In both cases the qbmove has to be powered with another ERNI cable respectively directly or through the dummy board.

    • Chained mode: the device has to be connected through an ERNI cable to an already connected and powered qbrobotics device chain.

    Even if your qbmove is connected to a qbrobotics device chain, with this node you can control only the qbmove specified by the given ID. In case you are wondering how to properly control many qbrobotics devices simultaneously, have a look at the specific qb_multi_device ROS package which simply groups together several qb_hand_control and qb_move_control nodes to manage their resources efficiently.

  • In the following you need to know the current device ID of your qbmove. If it is the first time you are using our product or simply you are not sure about it, check the device info with the command line utility.

    Once installed the utility following its README, you should be able to retrieve the device info by executing the following command in a terminal:

    cd <qb_admin_unix_binaries_path>
    ./qbadmin -p

Each qbrobotics device you connect to your system must have a unique ID.

For more details about interfacing the qbmove with your system or with other qbrobotics devices we recommend you to read carefully the qbmove manual.

Wiki: qb_move/Tutorials/qbmove Setup (last edited 2017-03-15 14:36:02 by AlessandroTondo)