Show EOL distros: 

Fedora 11 Installation Instructions

SVN Based Install (download-and-compile)

Setup

sudo yum groupinstall 'Development Tools'
sudo yum install wget cmake PyYAML python-setuptools-devel

rosinstall

The following lines will download the ROS source code using the rosinstall tool, and bootstrap the installation. The installation downloads all ROS stacks in subdirectories inside the ~/ros directory, one subdirectory for each stack in the rosinstall file.

First install rosinstall:

  • sudo easy_install -U rosinstall

Then use rosinstall to download your preferred C-Turtle variant:

  • ROS-only: Includes basic ROS and tutorials.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=cturtle&variant=ros_only&overlay=no"

    Base Install: ROS plus robot-generic stacks (e.g. navigation, visualization)

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=cturtle&variant=base&overlay=no"

    PR2 Install: ROS plus PR2-specific stacks, including PR2 simulator.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=cturtle&variant=pr2&overlay=no"

    PR2 All Install: ROS plus PR2 and bleeding edge research/experimental stacks.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=cturtle&variant=pr2all&overlay=no"

NOTE: the instructions above download all stacks inside the ~/ros folder. If you prefer a different location, simply change the ~/ros in the commands above.

Environment Setup

Shell language:   Bash     Zsh    

You'll now need to update your environment. You can do this by typing:

source ~/ros/setup.bash

It's convenient if the ROS environment variables are automatically added to your bash session every time a new shell is launched, which you can do with the command below:

echo "source ~/ros/setup.bash" >> ~/.bashrc
. ~/.bashrc

For Zsh users, change the last line of ~/ros/setup.zsh to

source $ROS_ROOT/tools/rosbash/roszsh

before running source ~/ros/setup.zsh Similarly, have the setup script called at the start of each new shell session with

echo "source ~/ros/setup.zsh" >> ~/.zshrc
. ~/.zshrc

Tutorials

Now, to test your installation, please proceed to the ROS Tutorials.

Fedora Installation Instructions

(Fedora 11 and onwards should work fine)

SVN Based Install (download-and-compile)

Setup

sudo yum groupinstall 'Development Tools'
sudo yum install wget cmake PyYAML python-setuptools-devel
sudo yum install mercurial

rosinstall

The following lines will download the ROS source code using the rosinstall tool, and bootstrap the installation. The installation downloads all ROS stacks in subdirectories inside the ~/ros directory, one subdirectory for each stack in the rosinstall file.

First install rosinstall:

  • sudo easy_install -U rosinstall

There are many different libraries and tools in ROS. We provided four default configurations to get you started.

  • Desktop-Full Install: (Recommended): ROS Full, rviz, robot-generic libraries, 2D/3D simulators, navigation and 2D/3D perception

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=diamondback&variant=desktop-full&overlay=no"

    Desktop Install: : ROS Full, rviz, and robot-generic libraries

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=diamondback&variant=desktop&overlay=no"

    ROS-Full: ROS package, build, communication, and graphical tools.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=diamondback&variant=ros-full&overlay=no"

    ROS-Base: (Bare Bones) ROS package, build, and communication libraries.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=diamondback&variant=ros-base&overlay=no"

NOTE: the instructions above download all stacks inside the ~/ros folder. If you prefer a different location, simply change the ~/ros in the commands above.

Please reference REP 108 for description of other available configurations.

Environment Setup

Shell language:   Bash     Zsh    

You'll now need to update your environment. You can do this by typing:

source ~/ros/setup.bash

It's convenient if the ROS environment variables are automatically added to your bash session every time a new shell is launched, which you can do with the command below:

echo "source ~/ros/setup.bash" >> ~/.bashrc
. ~/.bashrc

For Zsh users, change the last line of ~/ros/setup.zsh to

source $ROS_ROOT/tools/rosbash/roszsh

before running source ~/ros/setup.zsh Similarly, have the setup script called at the start of each new shell session with

echo "source ~/ros/setup.zsh" >> ~/.zshrc
. ~/.zshrc

Tutorials

Now, to test your installation, please proceed to the ROS Tutorials.

Fedora Installation Instructions

SVN Based Install (download-and-compile)

Setup

sudo yum groupinstall 'Development Tools'
sudo yum install wget cmake PyYAML python-setuptools-devel
sudo yum install mercurial

rosinstall

The following lines will download the ROS source code using the rosinstall tool, and bootstrap the installation. The installation downloads all ROS stacks in subdirectories inside the ~/ros directory, one subdirectory for each stack in the rosinstall file.

First install rosinstall using pip (advanced options for pip):

  • sudo pip install -U rosinstall vcstools

There are many different libraries and tools in ROS. We provided four default configurations to get you started.

  • Desktop-Full Install: (Recommended): ROS Full, rviz, robot-generic libraries, 2D/3D simulators, navigation and 2D/3D perception

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=electric&variant=desktop-full&overlay=no"

    Desktop Install: : ROS Full, rviz, and robot-generic libraries

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=electric&variant=desktop&overlay=no"

    ROS-Full: ROS package, build, communication, and graphical tools.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=electric&variant=ros-full&overlay=no"

    ROS-Base: (Bare Bones) ROS package, build, and communication libraries.

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=electric&variant=ros-base&overlay=no"

NOTE: the instructions above download all stacks inside the ~/ros folder. If you prefer a different location, simply change the ~/ros in the commands above.

Please reference REP 113 for description of other available configurations.

Environment Setup

Shell language:   Bash     Zsh    

You'll now need to update your environment. You can do this by typing:

source ~/ros/setup.bash

It's convenient if the ROS environment variables are automatically added to your bash session every time a new shell is launched, which you can do with the command below:

echo "source ~/ros/setup.bash" >> ~/.bashrc
. ~/.bashrc

For Zsh users, change the last line of ~/ros/setup.zsh to

source $ROS_ROOT/tools/rosbash/roszsh

before running source ~/ros/setup.zsh Similarly, have the setup script called at the start of each new shell session with

echo "source ~/ros/setup.zsh" >> ~/.zshrc
. ~/.zshrc

Fixing Depency Installation Failure

If any dependencies are missing, the installation will abort because some code in rosdep is missing in the release version (1.6.2 at least). The error message will contain AttributeError: Fedora instance has no attribute 'installers'. After it fails, do the following (adjust initial change directory command to actual install path):

cd ~/ros
cd ros/tools/rosdep/src/rosdep/
svn merge -c 15179 https://code.ros.org/svn/ros/stacks/ros/trunk/tools/rosdep/src/rosdep/installers.py installers.py
svn merge -c 15179 https://code.ros.org/svn/ros/stacks/ros/trunk/tools/rosdep/src/rosdep/redhat.py redhat.py

Now run the installation command again exactly the same way you did before. This time the installation will succeed and any missing dependencies will be installed. Make sure you have sudo configured properly!

Tutorials

Now, to test your installation, please proceed to the ROS Tutorials.

Fedora Installation Instructions

SVN Based Install (download-and-compile)

Setup

sudo yum groupinstall 'Development Tools'
sudo yum install wget cmake PyYAML python-setuptools-devel boost apr gtest python-paramiko wxPython-devel wxGTK-devel
sudo yum install mercurial

rosinstall

The following steps requires two separate installation steps and will compile ROS-related code into two separate places/layers:

  1. Download and install the underlying core ROS libraries and tools into /opt/ros/fuerte.

  2. Download and build some higher-level ROS libraries using rosmake in ~/ros.

The compiled code from (1) is installed into /opt/ros/fuerte. While it is possible to install elsewhere (e.g. /usr), this is not well tested and you will encounter various problems along the way (e.g. having to change rosinstall files, having to manually install system dependencies, etc...). Please see REP 122: Filesystem Hiearchy Layout for more detailed documentation on how the installed files are placed.

The compiled code from (2) is simply built using rosmake, which is familiar to users of previous versions of ROS. The higher-level ROS stacks are download and build in subdirectories inside the ~/ros directory.

First install rosinstall, rospkg and rosdep as described in their instructions:

If you have trouble using rosws/rosinstall, you can manually download the projects by investigating the respective rosinstall file.

Layer 1: Install core libraries

The following instructions will create a system install of the core ROS libraries and tools. The installation is done using standard CMake/make tools, so experts can adjust to their liking.

  • ROS-Full: ROS package, build, communication, tutorials and graphical tools.

    • rosinstall --catkin ~/ros-underlay http://ros.org/rosinstalls/fuerte-ros-full.rosinstall

    ROS-Base: (Bare Bones) ROS package, build, and communication libraries.

    • rosinstall --catkin ~/ros-underlay http://ros.org/rosinstalls/fuerte-ros-base.rosinstall

For people having trouble with rosinstall or catkin on their particular OS: If you have downloaded the source files in a different way, you need to run catkin_init_workspace ~/ros-underlay. This script is part of catkin, which should by now also at least be in your workspace, you can use the script without installing catkin. It should create a suitable global CMakeLists.txt to use in the next step.

If you do not want to use catkin, follow standard cmake procedure for building cmake packages, and install the packages in the dependency order by manually checking the package.xml declarations.

Build and install the underlay into /opt/ros/fuerte:

  • cd ~/ros-underlay
    mkdir build
    cd build

Now, run cmake. The invocation depends on the platform you are on:

  • Debian-based platforms (e.g. Ubuntu, Mint) use:
    cmake .. -DCMAKE_INSTALL_PREFIX=/opt/ros/fuerte
    Other platforms use:
    cmake .. -DCMAKE_INSTALL_PREFIX=/opt/ros/fuerte -DSETUPTOOLS_DEB_LAYOUT=OFF

Finally, build + install the code:

  • make -j8
    sudo make install

Useful TIP: If you encounter problems with the make command due to "Unable to find 'swig.swg'" and "Unable to find 'python.swg'" errors then it probably due to the installation script having placed /swig at the toplevel/root directory.

To get around this problem do the following (and then restart make process as above)

cd /
sudo cp -r /swig /usr/local/share
cd ~/ros-underlay/build

Useful TIP: If you are having trouble with the make install command due to lib64 and lib problems, a work around is

cd /opt/ros/fuerte/
sudo mv lib/* lib64/
sudo rmdir lib
sudo ln -s lib64 lib

This makes the lib and the lib64 directory linked together and the make install command should work now.

Verify the installed environment:

  • . /opt/ros/fuerte/setup.sh
    which roscore

You should see:

  • /opt/ros/fuerte/bin/roscore

You can delete ~/ros-underlay now, if you wish. The ROS core libraries are now installed onto your system.

Layer 2: Higher-level robotics libraries and tools

Now it's time to create the second layer, which contains your main robotics libraries (e.g. navigation) as well as visualization tools like rviz. You will build this layer using rosmake, but it is not installed.

There are many different libraries and tools in ROS. We provided four default configurations to get you started.

NOTE: The rosinstall installation files below assume that you've installed into /opt/ros/fuerte, so you will need to change them manually if you have a different install path.

  • Desktop-Full Install: (Recommended): ROS Full, rviz, robot-generic libraries, 2D/3D simulators, navigation and 2D/3D perception

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=fuerte&variant=desktop-full&overlay=no"

    Desktop Install: : ROS Full, rviz, and robot-generic libraries

    • rosinstall ~/ros "http://packages.ros.org/cgi-bin/gen_rosinstall.py?rosdistro=fuerte&variant=desktop&overlay=no"

NOTE: the instructions above download all stacks inside the ~/ros folder. If you prefer a different location, simply change the ~/ros in the commands above.

Please reference REP 113 for description of other available configurations.

Environment Setup

Shell language:   Bash     Zsh    

You'll now need to update your environment. You can do this by typing:

source ~/ros/setup.bash

It's convenient if the ROS environment variables are automatically added to your bash session every time a new shell is launched, which you can do with the command below:

echo "source ~/ros/setup.bash" >> ~/.bashrc
. ~/.bashrc

You'll now need to update your environment. You can do this by typing:

source ~/ros/setup.zsh

It's convenient if the ROS environment variables are automatically added to your bash session every time a new shell is launched, which you can do with the command below:

echo "source ~/ros/setup.zsh" >> ~/.zshrc
. ~/.zshrc

Build Higher-level/tools (Layer 2)

First, initialize your rosdep. ROS Fuerte comes with rosdep 2. If you get a message that your default sources list exists, then don't worry as it means you've done this before.

  • sudo rosdep init
    rosdep update

Now, use rosdep 2 to install system dependencies. Many of the system dependencies will install into /opt/ros/fuerte and will not be usable if you have changed the installation prefix.

  • rosdep install -a

Useful TIP: to get rid of constant prompts of being sure with proceeding, you can use -y switch to tell the package manager to default 'Yes' while installing.

  • rosdep install -ay

Finally, build the ROS stacks using rosmake.

  • rosmake -a

Tutorials

Now, to test your installation, please proceed to the ROS Tutorials.

Installation Instructions for Groovy in Fedora

This page describes how to install Groovy in Fedora. Fedora is not officially supported by ROS and the installation might fail for several reasons. This page does not (yet) contain instructions for most higher level ROS packages, only for the base system. This includes the middleware and command line tools but not much more.

The following installation instructions are targeted for Fedora 18 and are currently a work in progress. Workarounds and patches for issues that may arise during installation will be posted after the installation instructions until we're able to get these fixes merged into package releases. Finally, instructions for installing ROS on Fedora 16 or 17 can be found at the bottom of the page, but there are no guarantees for the outcome of the install.

Prerequisites

Before you proceed, enabling RPM Fusion on your system will be necessary in order to have access to all required packages that will be installed during the installation process.

To enable RPM Fusion on Fedora 18:

  • $ sudo yum install --nogpgcheck http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-18.noarch.rpm
    $ sudo yum update

Now, if you installed Fedora with the default options, then you're probably missing a C++ compiler, patch, git, and pip. These can be installed with:

  • $ sudo yum install gcc-c++ patch git python-pip

The Fedora package calls pip "python-pip", while rosdep only looks for "pip". We'll make a symlink to handle this:

  • $ sudo ln -s /usr/bin/pip-python /usr/bin/pip

Next, we need to install a few ROS python tools using pip:

  • $ sudo pip-python install -U wstool rosdep rosinstall rospkg catkin-pkg

In order to use rosdep, we need to initialize it:

  • $ sudo rosdep init
    $ rosdep update

Installation

Start by building the core ROS packages.

Building the catkin Packages

ROS is in the process of converting to a new build system, catkin, but not all of the packages have been converted and the two build systems cannot be used simultaneously. Therefore it is necessary to build the core ROS packages first (catkin packages) and then the rest.

Create a catkin Workspace

In order to build the core packages, you will need a catkin workspace. Create one now:

  • $ mkdir ~/ros_catkin_ws
    $ cd ~/ros_catkin_ws

Next we will want to fetch the core packages so we can build them. We will use wstool for this. Select the wstool command for the particular variant you want to install:

Desktop-Full Install: ROS, rqt, rviz, robot-generic libraries, 2D/3D simulators, navigation and 2D/3D perception

  • $ wstool init -j8 src http://packages.ros.org/web/rosinstall/generate/raw/groovy/desktop-full

Desktop Install (recommended): ROS, rqt, rviz, and robot-generic libraries

  • $ wstool init -j8 src http://packages.ros.org/web/rosinstall/generate/raw/groovy/desktop

ROS-Comm: (Bare Bones) ROS package, build, and communication libraries. No GUI tools.

  • $ wstool init src -j8 http://packages.ros.org/web/rosinstall/generate/raw/groovy/ros_comm

This will add all of the catkin or wet packages in the given variant and then fetch the sources into the ~/ros_catkin_ws/src directory. The command will take a few minutes to download all of the core ROS packages into the src folder. The -j8 option downloads 8 packages in parallel.

In addition to the 3 variants above, more are defined in REP 131 such as robot, perception, etc. Just change the package path to the one you want, e.g., for robot do:

$ wstool init -j8 http://packages.ros.org/web/rosinstall/generate/dry/raw/groovy/robot

Resolving Dependencies

Before you can build your catkin workspace you need to make sure that you have all the required dependencies. We use the rosdep tool for this:

  • $ rosdep install --from-paths src --ignore-src --rosdistro groovy -y

This will look at all of the packages in the src directory and find all of the dependencies they have. Then it will recursively install the dependencies.

The --from-paths option indicates we want to install the dependencies for an entire directory of packages, in this case src. The --ignore-src option indicates to rosdep that it shouldn't try to install any ROS packages in the src folder from the package manager, we don't need it to since we are building them ourselves. The --rosdistro option is required because we don't have a ROS environment setup yet, so we have to indicate to rosdep what version of ROS we are building for. Finally, the -y option indicates to rosdep that we don't want to be bothered by too many prompts from the package manager.

After a while (and maybe some prompts for your password) rosdep will finish installing system dependencies and you can continue.

Building the catkin Workspace

Once it has completed downloading the packages and resolving the dependencies you are ready to build the catkin packages. We will use the catkin_make_isolated command because there are both catkin and plain cmake packages in the base install, when developing on your catkin only workspaces you should use catkin/commands/catkin_make.

Invoke catkin_make_isolated:

  • $ ./src/catkin/bin/catkin_make_isolated --install -DSETUPTOOLS_DEB_LAYOUT=OFF

Note: The default catkin installation location would be ~/ros_catkin_ws/install_isolated, if you would like to install some where else then you can do this by adding the --install-space /opt/ros/groovy argument to your catkin_make_isolated call.

For usage on a robot without Ubuntu, it is recommended to install compiled code into /opt/ros/groovy just as the Ubuntu packages would do. Don't do this in Ubuntu, as the packages would collide with apt-get packages. It is also possible to install elsewhere (e.g. /usr), but it is not recommended unless you really know what you are doing.

Please see REP 122: Filesystem Hierarchy Layout for more detailed documentation on how the installed files are placed.

Note: In the above command we are running the catkin_make_isolated command from the catkin source folder because it has not been installed yet, once installed it can be called directly.

Now the packages should have been installed to ~/ros_catkin_ws/install_isolated or to wherever you specified with the --install-space argument. If you look in that directory you will see that a setup.bash file have been generated. To utilize the things installed there simply source that file. Lets do that now before building the rest of ROS:

  • $ source ~/ros_catkin_ws/install_isolated/setup.bash

Build the rosbuild Packages

Now that you have the catkin ROS packages built and sourced, you can build any of the packages and stacks using the rosbuild build system.

Create a rosbuild workspace

Note: You do not need to do this part of the installation for the ROS-Comm: (Bare Bones) variant as it does not contain any rosbuild packages in it.

Like with building catkin packages, it is convenient to build rosbuild packages in a workspace. Lets create a ROS workspace using rosws:

  • $ mkdir ~/ros_ws
    $ cd ~/ros_ws
    $ rosws init . ~/ros_catkin_ws/install_isolated

Note that we are pointing the ROS workspace to the catkin install location that we built in the previous step. This allows the ROS workspace to always source the catkin install location environment before you use the ROS workspace.

Download ROS Stacks

Now we need to get the dry (rosbuild) components of the variant you chose before. Use the corresponding command for your variant to do this:

Desktop-Full Install: 2d/3d simulators, navigation, robot models and several tutorial stacks

  • $ rosws merge http://packages.ros.org/web/rosinstall/generate/dry/raw/groovy/desktop-full

Desktop Install (recommended): ROS, rqt, rviz, and robot-generic libraries

  • $ rosws merge http://packages.ros.org/web/rosinstall/generate/dry/raw/groovy/desktop

Now this just sets up your rosbuild workspace, you need to tell rosws to fetch the packages still:

  • $ rosws update -j8

The rosbuild workspace is now ready for dependency resolution and compiling, so source the setup.bash to make the stacks visible to your ROS environment:

  • $ source ~/ros_ws/setup.bash

Resolving ROS Stack Dependencies

Like the catkin packages, rosbuild packages may have system package dependencies. Again we use wstool to download and install these dependencies:

  • $ rosdep install -a --ignore-src --rosdistro groovy -y

Build the ROS Stacks

The final step in the process is to compile the ROS stacks. Optionally, you may specify the -i flag, which will cause rosmake to place a ROS_NOBUILD file in the stack/package folders, causing it to not attempt to recompile the stack/package during future rosmake calls.

  • $ rosmake -a

Troubleshooting

This section will grow and shrink as new issues arise and fixes are pushed into packages.

Wet Packages

warehouse_ros fails to download

When running the 'wstool init' command to fetch the core packages, you may get an error similar to the following. (Note: the '...' is not part of error. There will most likely be other output from wstool instead of the '...'.)

ERROR [vcstools] Tarball download unpack failed: u"warehouse_ros-release-release-warehouse_ros-0.7.12 is not a subdirectory with contents in members [u'warehouse-release-release-warehouse_ros-0.7.12']"[/vcstools]

...

Exception caught during install: Error processing 'warehouse_ros' : [warehouse_ros] Checkout of https://github.com/ros-gbp/warehouse-release/archive/release/warehouse_ros/0.7.12.tar.gz version warehouse_ros-release-release-warehouse_ros-0.7.12 into /home/user/ros_catkin_ws/src/warehouse_ros failed.

ERROR in config: Error processing 'warehouse_ros' : [warehouse_ros] Checkout of https://github.com/ros-gbp/warehouse-release/archive/release/warehouse_ros/0.7.12.tar.gz version warehouse_ros-release-release-warehouse_ros-0.7.12 into /home/user/ros_catkin_ws/src/warehouse_ros failed.

The source of this error is currently unkown, but there is known a workaround. Somehow, the .rosinstall file generated contains the wrong version name of warehouse_ros. First cd into the your src directory.

cd src

Next, with your favorite editor, open the .rosinstall file and find the following line:

- tar: {local-name: warehouse_ros, uri: 'https://github.com/ros-gbp/warehouse-release/archive/release/warehouse_ros/X.X.X.tar.gz',
    version: warehouse_ros-release-release-warehouse_ros-X.X.X}

The X.X.X is the version number and may not be the same for each user. Now, replace that line with:

- tar: {local-name: warehouse_ros, uri: 'https://github.com/ros-gbp/warehouse-release/archive/release/warehouse_ros/X.X.X.tar.gz',
    version: warehouse-release-release-warehouse_ros-X.X.X}

Make sure the version number (the X.X.X) remains the same as before. Finally, run the following commands. This command must be run in your src directory.

wstool update
cd ..

You may now continue the installation.

depth_image_proc fails to build (1 of 2)

This issue could be a problem with PCL or Catkin or something else entirely. Fedora places the VTK libraries in a subdirectory of the system library directory, and this subdirectory is not searched by Catkin when other packages compile against PCL. The problem presents itself as follows:

Project 'depth_image_proc' tried to find library 'vtkCommon'.  The library
  is neither a target nor built/installed properly.  Did you compile project
  'pcl_ros'? Did you find_package() it before the subdirectory containing its
  code is included?

The easiest way to work around this is to update the PCLConfig.cmake file to use absolute paths to the libraries, so there is no question as to their location and Catkin doesn't search for them. The file that generates PCLConfig.cmake is located at src/pcl/PCLConfig.cmake.in. Change this line:

    set(VTK_LIBRARIES vtkCommon vtkRendering vtkHybrid)

to the following:

    set(VTK_LIBRARIES ${VTK_LIBRARY_DIRS}/libvtkCommon.so ${VTK_LIBRARY_DIRS}/libvtkRendering.so ${VTK_LIBRARY_DIRS}/libvtkHybrid.so)

You will then need to re-compile pcl and pcl_ros. To force Catkin to do so, remove their build directories:

$ rm build_isolated/pcl build_isolated/pcl_ros -rf

There is an issue open on GitHub for this problem: https://github.com/ros-gbp/pcl-release/issues/2

depth_image_proc fails to build (2 of 2)

Another long running issue is the result of a problem between PCL and Eigen3, which presents itself similar to the following:

/usr/bin/ld: _ZZN5Eigen8internal20manage_caching_sizesENS_6ActionEPlS2_E13m_l1CacheSize: TLS definition in ros_catkin_ws/install_isolated/lib/libpcl_sample_consensus.so section .tbss mismatches non-TLS definition in ros_catkin_ws/install_isolated/lib/libopencv_contrib.so section .bss
install_isolated/lib/libpcl_sample_consensus.so: could not read symbols: Bad value

The only known workaround is to fall back to an earlier version of eigen3-devel and re-compile PCL. Perform these commands to downgrade eigen3-devel to a Fedora 17 version and force re-compilation of PCL:

$ sudo yum remove eigen3-devel
$ sudo yum install http://dl.fedoraproject.org/pub/fedora/linux/releases/17/Everything/x86_64/os/Packages/e/eigen3-devel-3.0.4-2.fc17.noarch.rpm
$ rm build_isolated/pcl -rf

Dry Packages

stage fails to build

For whatever reason, FLTK is not included in stage's CMakeLists.txt and throws a linking error on Fedora:

/usr/bin/ld: CMakeFiles/bin/stageros.dir/src/stageros.cpp.o: undefined reference to symbol '_ZN2Fl4waitEd'
/usr/bin/ld: note: '_ZN2Fl4waitEd' is defined in DSO /lib64/libfltk.so.1.3 so try adding it to the linker command line
/lib64/libfltk.so.1.3: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make[4]: *** [../bin/stageros] Error 1

To fix this issue, see the open ticket and apply the patch found there: https://code.ros.org/trac/ros-pkg/ticket/5507

gmapping fails to build

In RedHat distributions, patch will not apply a diff that contains ".." in a path, where Ubuntu seems to allow this. When compiling gmapping, this will cause an error like this:

cd build/gmapping_export && patch -p0 < ../../gmapping-r39.patch && patch -p0 < ../../gmapping-r39-2.patch && ./configure
  patch: **** rejecting target file name with ".." component: ../../gmapping_export/build_tools/Makefile.generic-shared-object
  make[1]: *** [installed] Error 2

There is an issue open that contains a patch to fix this: https://code.ros.org/trac/ros-pkg/ticket/5602

Installing on Fedora 16 and 17

For users still running Fedora 16 or 17 it is highly recommended to upgrade to Fedora 18, as support for ROS in Fedora will be primarily focused towards Fedora 18. But, if you wish to continue the installation for Fedora 16 or 17, the following seems to have worked on at least one Fedora 16 and one Fedora 17 system:

  • # Install prerequisites:
    $ sudo yum install boost-devel gtest-devel log4cxx-devel apr-util-devel bzip2-devel python-pip
    $ sudo ln -s /usr/bin/pip-python /usr/bin/pip
    $ sudo easy_install wstool
    $ sudo easy_install rospkg
    $ sudo easy_install rosdep
    
    # Create build & install directories and init rosdep:
    $ sudo mkdir -p /opt/ros/groovy/ros_catkin_ws
    $ cd /opt/ros/groovy
    $ sudo rosdep init
    $ sudo rosdep update
    
    # Download and build ROS from source
    $ cd ros_catkin_ws
    $ sudo wstool init src -j3 http://packages.ros.org/web/rosinstall/generate/raw/groovy/ros_comm
    ## sudo may not be needed with the next command
    $ sudo rosdep install --from-paths src --ignore-src --rosdistro groovy -y
    $ sudo ./src/catkin/bin/catkin_make_isolated --install --install-space /opt/ros/groovy -DSETUPTOOLS_ARG_EXTRA="" -DSETUPTOOLS_DEB_LAYOUT=OFF
    $ cd ..
    
    # Set up your environment to start using ROS (might put this in .bashrc):
    $ source ./setup.bash

Please refer to the Source Installation Directions

Wiki: Installation/Fedora (last edited 2015-09-24 00:01:38 by RichMattes)