Overview

This provides a build recipe for cross-compiling a gdb/gdbserver combo. This pair of tools allows you to do remote debugging without having to run the debugger itself (nor libs with debugging symbols) on the target. Very useful for embedded boards with limited memory or oomph.

This package is a component of eros' toolchain bridge.

Compiling

This actually absolutely needs an eros toolchain to enable it to extract useful information from TOOLCHAIN_TUPLE and TOOLCHAIN_SYSROOT.

Tested

  • Native:
  • Cross-Compile: arm

Usage

Running

Make sure you have copies of your binary both locally and on the embedded board. The embedded board copy may even be stripped, but the local one must absolutely be non-stripped and have debug symbols.

Embedded Board

gdbserver 192.168.0.66:5200 ./hello

Note that the ip is actually ignored, the port number is the only thing that is important.

Build Platform

arm-samsung-linux-gnueabi-gdb ./hello
(gdb) target remote 192.168.0.15:5200
(gdb) break main
(gdb) continue
(gdb) continue

Backtraces

The first continue will stop at main, the second continue starts it running. After a segfault

(gdb) list
(gdb) bt

The first command shows the source location of the last frame before the crash. The latter, the backtrace (f full) provides the last chain of commands.

Issues

If the backtrace doesn't provide any symbols (all you see is alot of ??'s), it means gdb isn't finding the debug symbols in the appropriate code/libraries. I thought it was supposed to embed these in your build when you enable the –with-build-sysroot command, but it seems that is only for the build process. So, to point your cross debugger at the right place, you can either set some variables while running, or (more easily) create a config file to run with gdb on the build platform. The following example iclebo.gdb sets directories in the sysroot to parse standard libraries in:

set solib-absolute-prefix /usr/arm-samsung-linux-gnueabi
set solib-search-path /usr/arm-samsung-linux-gnueabi/lib:/usr/arm-samsung-linux-gnueabi/usr/lib

You can then run it on something like a hellow world program as follows:

arm-samsung-linux-gnueabi-gdb --command=iclebo.gdb ./hello
(gdb) target remote 192.168.0.15:5200
(gdb) break main
(gdb) continue
(gdb) continue

Push this into a bash script to make it more convenient.

Wiki: eros_gdbserver (last edited 2010-11-17 14:47:09 by DanielStonier)