Only released in EOL distros:  

summit_xl_sim: summit_xl_control | summit_xl_gazebo | summit_xl_robot_control | summit_xl_sim_bringup

Package Summary

Control the robot joints in all kinematic configurations, publishes odom topic and, if configured, also tf odom to base_link. Usually takes as input joystick commands and generates as outputs references for the gazebo controllers defined in summit_xl_control.

summit_xl_sim: summit_xl_gazebo | summit_xl_sim_bringup

Package Summary

Control the robot joints in all kinematic configurations, publishes odom topic and, if configured, also tf odom to base_link. Usually takes as input joystick commands and generates as outputs references for the gazebo controllers defined in summit_xl_control.

Contents

  1. Overview

Overview

Control the robot joints in all kinematic configurations, publishes odom topic and, if configured, also tf odom to base_link. Usually takes as input joystick commands and generates as outputs references for the gazebo controllers defined in summit_xl_control. This package permits an alternative way to control the robot motion (4 motorwheels) that by default is carried on by the Gazebo plugin (skid-steer). In the default configuration this package only controls the pan-tilt camera joints. When used as main controller of the simulated robot, this node also computes the odometry of the robot using the joint movements and a IMU and publish this odometry to /odom. The node has a flag in the yaml files that forces the publication or not of the odom->base_footprint frames, needed by the localization and mapping algorithms.

Wiki: summit_xl_robot_control (last edited 2016-06-24 06:23:05 by carlosvillar)