 Please ask about problems and questions regarding this tutorial on answers.ros.org. Don't forget to include in your question the link to this page, the versions of your OS & ROS, and also add appropriate tags. |
Installing Ubuntu with ROS
Description: This tutorial describes the steps needed to get a proper Unbuntu and ROS installation to have a system up and running for the TALOS tutorials.Tutorial Level: BEGINNER
Next Tutorial: Robots/TALOS/Tutorials/Installation/Simulation
Author: Víctor López < victor.lopez@pal-robotics.com >
Maintainer: Víctor López < victor.lopez@pal-robotics.com >
Source: https://github.com/pal-robotics/talos_tutorials
Show EOL distros:
Not supported. Currently supported ROS LTS: kinetic.
Ubuntu installation
In order to run the public simulation of TALOS it is preferable to get a fresh installation of Ubuntu 16.04.4 LTS as follows
wget http://releases.ubuntu.com/16.04/ubuntu-16.04.4-desktop-amd64.iso
Use this ISO to install a fresh Ubuntu OS in your development computer. Afterwards, you can proceed installing ROS as explained in the next section.
ROS installation
Set up ROS packages sources
In order to install the required ROS packages for running TALOS's simulation first, as explained in ROS Kinetic installation, it is required to include packages.ros.org in the debian sources:
sudo sh -c 'echo "deb http://packages.ros.org/ros/ubuntu $(lsb_release -sc) main" > /etc/apt/sources.list.d/ros-latest.list'
The set up the required keys to access the debian sources:
sudo apt-key adv --keyserver hkp://ha.pool.sks-keyservers.net --recv-key 421C365BD9FF1F717815A3895523BAEEB01FA116
In case of getting a gpg: keyserver timed out error try the following:
sudo apt-key adv --keyserver hkp://ha.pool.sks-keyservers.net:80 --recv-key 421C365BD9FF1F717815A3895523BAEEB01FA116
ROS packages installation
install use the following instruction
sudo apt-get update sudo apt-get install git python-rosinstall ros-kinetic-desktop-full python-catkin-tools ros-kinetic-joint-state-controller ros-kinetic-twist-mux ros-kinetic-ompl ros-kinetic-controller-manager ros-kinetic-moveit-core ros-kinetic-moveit-ros-perception ros-kinetic-moveit-ros-move-group ros-kinetic-moveit-kinematics ros-kinetic-moveit-ros-planning-interface ros-kinetic-moveit-simple-controller-manager ros-kinetic-moveit-planners-ompl ros-kinetic-joy ros-kinetic-joy-teleop ros-kinetic-teleop-tools ros-kinetic-control-toolbox ros-kinetic-sound-play ros-kinetic-navigation ros-kinetic-eband-local-planner ros-kinetic-depthimage-to-laserscan ros-kinetic-openslam-gmapping ros-kinetic-gmapping ros-kinetic-moveit-commander
Append the following command to ~/.bashrc to allow any console to use the catkin commands
source /opt/ros/kinetic/setup.bash
Not supported. Currently supported ROS LTS: kinetic.
Not supported. Currently supported ROS LTS: kinetic.
Ubuntu installation
In order to run the public simulation of TALOS it is preferable to get a fresh installation of Ubuntu 18.04.2 LTS as follows
wget http://releases.ubuntu.com/18.04/ubuntu-18.04.2-desktop-amd64.iso
Use this ISO to install a fresh Ubuntu OS in your development computer. Afterwards, you can proceed installing ROS as explained in the next section.
ROS installation
Set up ROS packages sources
In order to install the required ROS packages for running TALOS's simulation first, as explained in ROS Melodic installation, it is required to include packages.ros.org in the debian sources:
sudo sh -c 'echo "deb http://packages.ros.org/ros/ubuntu $(lsb_release -sc) main" > /etc/apt/sources.list.d/ros-latest.list'
The set up the required keys to access the debian sources:
sudo apt-key adv --keyserver hkp://ha.pool.sks-keyservers.net --recv-key 421C365BD9FF1F717815A3895523BAEEB01FA116
In case of getting a gpg: keyserver timed out error try the following:
sudo apt-key adv --keyserver hkp://ha.pool.sks-keyservers.net:80 --recv-key 421C365BD9FF1F717815A3895523BAEEB01FA116
ROS packages installation
install use the following instruction
sudo apt-get update sudo apt-get install git python-rosinstall ros-melodic-desktop-full python-catkin-tools ros-melodic-joint-state-controller ros-melodic-twist-mux ros-melodic-ompl ros-melodic-controller-manager ros-melodic-moveit-core ros-melodic-moveit-ros-perception ros-melodic-moveit-ros-move-group ros-melodic-moveit-kinematics ros-melodic-moveit-ros-planning-interface ros-melodic-moveit-simple-controller-manager ros-melodic-moveit-planners-ompl ros-melodic-joy ros-melodic-joy-teleop ros-melodic-teleop-tools ros-melodic-control-toolbox ros-melodic-sound-play ros-melodic-navigation ros-melodic-eband-local-planner ros-melodic-depthimage-to-laserscan ros-melodic-openslam-gmapping ros-melodic-gmapping ros-melodic-moveit-commander
Append the following command to ~/.bashrc to allow any console to use the catkin commands
source /opt/ros/melodic/setup.bash
Not supported. Currently supported ROS LTS: melodic.
