Author: Alessandro Di Fava < alessandro.difava@pal-robotics.com >
Maintainer: Jordi Pages < jordi.pages@pal-robotics.com >
Support: tiago-support@pal-robotics.com
Source: https://github.com/pal-robotics/tiago_dual_tutorials.git
 Please ask about problems and questions regarding this tutorial on answers.ros.org. Don't forget to include in your question the link to this page, the versions of your OS & ROS, and also add appropriate tags. |
Teleoperating the mobile base with the keyboard
Description: How to move the differential drive base of TIAGo++ using the key_teleop package.Keywords: teleoperation, mobile base, key_teleop
Tutorial Level: BEGINNER
Next Tutorial: Move the base through velocity commands
Purpose
This tutorial shows a way to teleoperate the mobile base of TIAGo++ using the keyboard. This relies on the ROS package key_teleop which is compatible with most of ROS enabled robots.
Pre-requisites
First make sure that the tutorials are properly installed along with the TIAGo++ simulation, as shown in the Tutorials Installation Section.
Execution
First open two consoles and source the public simulation workspace as follows:
cd ~/tiago_dual_public_ws source ./devel/setup.bash
Launching the simulation
In the first console launch for example the following simulation
roslaunch tiago_dual_gazebo tiago_dual_gazebo.launch public_sim:=true world:=simple_office_with_people
Gazebo will show up with TIAGo++ in the following world.
Running key_teleop
In the second console run key_teleop as follows
rosrun key_teleop key_teleop.py
which will transform the appearance of the console into this
Now pressing the up and down arrows will make the robot go forward and backward respectively. Left and right arrows will cause the robot to turn about itself in the corresponding directions.
