Note: These tutorials is designed for use only with robots purchased before June 2014. The current packages are in ric

  1. Beginners guide - stand alone single Lizi robot operation

    This tutorial aims to instruct the beginner user how to operate the robot in its first use.

  2. Calibrating the Lizi robot IMU

    This tutorial explains how to calibrate the Lizi robot IMU (Inertial Measurement Unit)

  3. Network setup for controlling the Lizi robots from a remote machine

    This tutorial cover the required setup for controlling the Lizi robots from a remote computer

  4. Programming the Lizi robot micro-controller

    This tutorial explains how to re-upload the code to the Lizi robot micro-controller (Atduino DUE).

  5. Lizi robot installation

    This tutorial covers the required steps for installing the Lizi robot software on a new computer.

Create a new tutorial:

Wiki: lizi_robot/Tutorials (last edited 2014-07-02 05:31:21 by yamgeva)

Except where otherwise noted, the ROS wiki is licensed under the
Creative Commons Attribution 3.0