Note: This tutorial assumes that you have completed the previous tutorials: Keyboard Teleop.
(!) Please ask about problems and questions regarding this tutorial on answers.ros.org. Don't forget to include in your question the link to this page, the versions of your OS & ROS, and also add appropriate tags.

ジョイスティック・テレオペレーション

Description: turtlebotのジョイスティック・テレオペレーション

Keywords: joystick teleop

Tutorial Level: BEGINNER

Next Tutorial: Interactive Markers Teleop

ジョイスティック

PlayStation3, Xbox360, そして, Logitech rumblepad2といった, 数種類のジョイスティック構成がサポートされています. これらの例となるノードは単純で、 手持ちのジョイスティックに依ってはキーをリマッピングする必要があるかもしれません。

ジョイスティックを設定する

ほとんどの部分において、 このチュートリアルは既にジョイスティックを接続済みで、使用準備が整っている状態であることを前提としています.。特定のジョイスティックに関する詳細は以下を参照してください:

TurtleBot上での作業

TurtleBotにSSH接続し (ssh help) 、ジョイスティックとテレオペのノードを起動します。

  • To ssh in to a TurtleBot from a workstation computer:

    • determine the IP_OF_TURTLEBOT by using ifconfig (Need more help)

      To determine a computer's IP address and network interface in linux:

      • ifconfig

      You will see something like:

      • lo        Link encap:Local Loopback  
                  inet addr:127.0.0.1  Mask:255.0.0.0
                  inet6 addr: ::1/128 Scope:Host
                  UP LOOPBACK RUNNING  MTU:16436  Metric:1
                  RX packets:6658055 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:6658055 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:0 
                  RX bytes:587372914 (587.3 MB)  TX bytes:587372914 (587.3 MB)
        
        wlan1     Link encap:Ethernet  HWaddr 48:5d:60:75:58:90  
                  inet addr:10.0.129.17  Bcast:10.0.129.255  Mask:255.255.254.0
                  inet6 addr: fe80::4a5d:60ff:fe75:5890/64 Scope:Link
                  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                  RX packets:101983 errors:0 dropped:0 overruns:0 frame:0
                  TX packets:37244 errors:0 dropped:0 overruns:0 carrier:0
                  collisions:0 txqueuelen:1000 
                  RX bytes:49326141 (49.3 MB)  TX bytes:7588044 (7.5 MB)
      • the network interface for the wireless card is wlan1

      • the IP address of the computer is 10.0.129.17


    • use ssh to connect to the TurtleBot

      ssh turtlebot@IP_OF_TURTLEBOT

# Playstation 3
> roslaunch turtlebot_teleop ps3_teleop.launch
# Xbox360 (use the left stick while keeping the right stick pressed in)
> roslaunch turtlebot_teleop xbox360_teleop.launch
# Logitech joysticks (general configuration for all logitech joysticks)
> roslaunch turtlebot_teleop logitech.launch

サポートされていないジョイスティック

上記に挙げられていないジョイスティックを使用する場合、 キーをマッピングしなおすという単純な問題があります。ps3_teleop.launchファイルを手がかりに, 適切にボタンの構成設定を行いましょう(deadman_axisにどのボタンを割り当てるかという問題を解決することが最も重要です)。押された個々のボタンのIDを確認するため、 /joyトピックをechoします。

<launch>
  <!--  smooths inputs from cmd_vel_mux/input/teleop_raw to cmd_vel_mux/input/teleop -->
  <include file="$(find turtlebot_teleop)/launch/includes/velocity_smoother.xml"/>

  <node pkg="turtlebot_teleop" type="turtlebot_teleop_joy" name="turtlebot_teleop_joystick">
    <param name="scale_angular" value="1.5"/>
    <param name="scale_linear" value="0.5"/>
    <param name="axis_deadman" value="10"/>
    <param name="axis_linear" value="1"/>
    <param name="axis_angular" value="0"/>
    <remap from="turtlebot_teleop_joystick/cmd_vel" to="cmd_vel_mux/input/teleop_raw"/>
  </node>
  <node pkg="joy" type="joy_node" name="joystick"/>
</launch>

一旦, 個別のジョイスティックのlaunchファイルを確定させたら、 こちらに送り、 公式ソフトウェアと統合しましょう。

もっとHelpが必要なら?

Show other Joystick Tutorials   

  1. Teleoperate a Turtlebot with the PS3 Joystick

    Teleoperate a Turtlebot with the PS3 Joystick

  2. Joystick Teleop

    Joystick teleoperation of a turtlebot.

  3. TurtleBot Teleoperation

    How to teleoperate your TurtleBot with a keyboard, joystick, or rviz.

  4. ジョイスティック・テレオペレーション

    turtlebotのジョイスティック・テレオペレーション.

  5. Joystick Teleop

    Joystick teleoperation of a turtlebot.

  6. How to Use a SpaceNavigator with the spacenav_node

    This tutorial is an introduction to using the 3DConnexion SpaceNavigator connected to a desktop. After reading this, you should be able to bring up the spacenav_node and display the data.

  7. Writing a Teleoperation Node for the SpaceNavigator

    This tutorial covers how to write a teleoperation node and use it to drive the turtle in the turtlesim.

  8. How to Pair the PS3 Joystick with a Bluetooth Dongle

    This tutorial is an introduction to using the PS3 DualShock 3 Joystick connected via bluetooth to a desktop computer. After reading it, you should be able to bring up the ps3joy node and display the data coming from the joystick.

  9. Writing a Teleoperation Node for the PS3 Joystick

    This tutorial covers how to write a teleoperation node and use it to drive the turtle in the turtlesim.

  10. Joystick Teleop

    Joystick teleoperation of a turtlebot.

  11. Configuring and Using a Linux-Supported Joystick with ROS

    This tutorial is an introduction to using the joystick connected to a desktop computer. After reading it, you should be able to bring up the joy node and display the data coming from the joystick over ROS.

  12. Writing a Teleoperation Node for a Linux-Supported Joystick

    This tutorial covers how to write a teleoperation node and use it to drive the turtle in the turtlesim.

  13. PS3を使ったTurtlebotのテレオペレーション

    PS3を使ったTurtlebotの遠隔操作の説明

  14. ジョイスティック・テレオペレーション

    turtlebotのジョイスティック・テレオペレーション

  15. Writing a Teleoperation Node for the Wiimote

    This tutorial covers how to write a teleoperation node and use it to drive the turtle in the turtlesim.

  16. How to Recharge the PS3 Joystick

    This tutorial explains how to recharge the PS3 DUALSHOCK 3 or SIXAXIS Joystick. The tutorial includes details on how to simultaneously use the joystick over Bluetooth and recharge it.

  17. Connecting the PS3 Joystick to the PR2

    This tutorial is an introduction to using the PS3 DualShock 3 Joystick connected via bluetooth to a PR2.

  18. No Title

    No Description

  19. How to Write a Generic Teleoperation Node

    This tutorial goes over generic teleoperation code that is used as an example in many of the teleoperation tutorials.

次は?

Wiki: ja/turtlebot_teleop/Tutorials/hydro/Joystick Teleop (last edited 2014-09-28 18:14:02 by Moirai)